Central Steel Build is located in Kyneton, where our sheds are manufactured on site. We only use Australian steel which is brought to our branch and transformed into components of jobs ready to go out on site to be constructed.
We use a design to completion process, in order to relieve the stress from our clients and ensure the job flows smoothly from start to finish. The process consists of several different stages of which are listed below.
- The client receives a customized quote after talking to one of our sales consultants who is trained specifically in the industry under which the build lies.
- After finalizing the quote the building is engineered and designed specifically in house by our drafting team.
- Once the design and engineering is completed the build’s components in our factory located in Kyneton.
- These components are then sent away to be hot dipped galvanized.
- Finally the components are taken to site and constructed by one of our installer teams.
A project manager assigned to your job will oversee the whole process to ensure no problems are incurred along the way. We strive for complete satisfaction in our clients, sticking to deadlines and ensuring this process is as easy and painless as possible.
Can thoroughbreds do dressage?
Almost any kind of horse can perform well in dressage if they have natural ability, good training and a skilled rider. However, some kinds of horses will bring different challenges for dressage riders to overcome.
Can thoroughbreds do dressage?
Simple answer: Yes, look for a relaxed thoroughbred.
Long answer: OTTB (Of the track thoroughbred) horses are often considered unsuited to dressage. There are biases against them because of the experiences these horses have in racing.
Some of them can be too tense for dressage, but assuming that all OTTB horses aren’t appropriate can cause you to overlook some very, very excellent dressage horses for potentially very low prices comparatively.
Resale needs to be a consideration; people looking to buy eventing horses are sometimes put off knowing they are thoroughbred. However, if you dedicate yourself to the horse and perform well in your dressage career, your horse’s performance will speak for itself.
Can standardbreds do dressage?
Simple answer: Yes, their spring and energy can be a positive.
Long answer: Standardbreds are often used in harness racing and are taught to have long trots. This is the opposite of what we want in dressage; a nice, collected canter. So the biggest challenge with an off the track standardbred will be getting it to relax into a canter.
On the other hand, standardbreds have a lot of spring and energy, which results in excellent stepping.
It is uncommon to see standardbreds in dressage, so you’re likely to meet the same aversion when reselling as you would with a thoroughbred.
Can Clydesdales do dressage?
Simple answer: Clydesdales can do lower level dressage, but struggle to compete at top levels.
Long answer: Clydesdales are able to perform at lower level dressage and will benefit from it just like any other horse.
However, Clydesdales have been bred to be strong and thick, for their pulling power. This prevents them from the agility and detail that is required of horses competing in higher levels of dressage.
If you’re aiming to go to the top, you should avoid riding a Clydesdale, but if dressage is a passionate hobby, they will do fine. They may even outperform other horses in the earlier stages because of their steadiness, and may be more forgiving for less experienced riders.
What is the optimal dressage horse?
Simple answer: Andalusian, Warmblood, Hanoverian, Lusitano, Oldenburg, Westphalian.
Long answer: The breeds above were the most popular horses used in dressage at the 2008 Olympics.
They are chosen because of their naturally good conformation and their ability to learn and adapt to the tasks that dressage require of a horse.