How much does it cost to build a factory?
Although every job is unique, and factories range from the very small to the very large, we’ll outline some estimates and figures below.
The best way to find out is to request a quote. You’ll get a response within 1 working day with an exact figure.
NOTE: These costs include the design & fabrication of the structural steel and the cost of installation. They do not include fit-out costs or site preparation costs.
Small to medium warehouses
Small to medium builds include small warehouses, extensions, washbays and workshops.
Cost range: $10,000 – $45,000
Size range: 50m2 – 400m2
Medium buildings are often storage sheds, machinery sheds and smaller factories.
Cost Range: $45,000 – $80,000
Size range: 200m2 – 700m2
Large warehouses & factories
Large projects include large warehouses, infrastructural buildings and factories. These are usually built by medium sized companies.
Cost range: $80,000 – $400,000
Size range: 350m2 – 2,300m2
(We also build structures larger than these measurements. Contact us for details).
Will I need a building permit?
We are registered builders, so we can take care of all the paperwork and all of the building permits. You can leave that stuff entirely to us and focus on what you need from your building.
Where have you built before?
We’ve built all over Australia, and we’re able to travel to any state. We recently built a bull riding ring for the Stockman’s Hall Of Fame in Queensland, but we’re based in Kyneton, Victoria.
You can see a map of our buildings here:
Where can I see photos of your work?
The best and easiest way to see photos of our work is to download a brochure. We’ve put together a collection of our best projects there.
5 Steps To Building A Horse Riding Arena
1. Plan & Design.
The first stage, as with any large project, is to think things through and plan.
Find out which mistakes you needs to avoid, and make sure you have a very clear idea of how you want your project to turn out.
You will also need to decide the scope of your project. Will you just be building an arena surface and small border, or do you plan on building a fully enclosed indoor?
2. Find your location.
Part of planning is finding a location for your arena. It should have easy access, should avoid water run-off during rain, and be protected from the weather if possible.
Also important will be making sure you arena fits, so measure your available space and decide on an appropriate arena size.
3. Build the Base.
For proper drainage, you’ll need to level your arena and lay crushed stone as a base. You can then look at laying the surface.
The most important thing at this stage is making sure your arena drains well, particularly if you aren’t planning on building a cover.
4. Design your indoor.
If you’re building a steel indoor, do some research & find out about local companies that can build for you. Look for a company that will handle your building permits, can adjust the project according to your desires, and has their own team of designers & engineers.
5. Build & enjoy.
When your arena is complete, enjoy it! If possible, share it or rent it out when you aren’t using it. Hold lessons. Make sure that your new arena is something that you and others get a lot of joy from.
SEE MORE: Our EquinaBuild brochure.
8 More Genius Horse Ideas, Tips & Hacks
Put baby powder onto your horses white patches to make them stand out even more. For a longer lasting effect, run some hair gel through the hair first to make the powder stick.
Watch Tack in Your Dish Washer
Non-leather tack only can be washed int he top drawing of the dish washer. This is a great, easy way to clean things like bits.
Make Your Horses Photogenic
Want your horse to lift his ears up for a photograph? Find a video of horses neighing and that will grab his attention and get him to prick his ears.
Use Listerine to Clean Your Bits
Clean a gunky bit by spraying it with some Listerine and using a toothbrush to give it a scrub.
Fix A Squeak With Vaseline
If your tack is squeaking, find out what’s rubbing and wipe on a little bit of vaseline.
Using Old Baling Twine as a Rag
If you’ve run out of scrubbers, a handful of baling twine will help you clean up. There are hundreds of uses around the barn for baling twine.
Use Vodka to keep your help nice
Create a mixture of half water, half vodka and spray it into your helmet after a ride. The alcohol will kill the bacteria and stop the smell.
Soften Your Bell Boots With Warm Water
This will make them much easier to pull on and off your horse’s feet.
Looking for other equestrian tips? Read our list of 16 Tips Every Equestrian Should Know.